Create A Hotfolder - Oce VarioPrint 6000 User Manual Operating Information

Create a hotfolder

Introduction
The information in this section is intended for system administrator.
Before you begin
The hotfolder function must be activated. Otherwise, the system administrator must ac-
tivate the hotfolder function first.
Note:
You can create up to 10 hotfolders.
How to create a hotfolder
Note:
For this procedure, the System administrator password is required.
Open your web browser and enter the host name or IP address of your PRISMAsync
1.
controller.
Go to 'Workflow' -> 'Hotfolders'.
2.
Click 'Add'.
3.
Give the hotfolder a logical name.
4.
A logical name helps you to recognize the type of jobs you want to process using this
hotfolder.
Select the automated workflow to which you want to link the hotfolder.
5.
Click 'OK'.
6.
•
Introduction to hotfolders, on page 101
•
Activate the hotfolder function, on page 102
•
Create a shared network folder on a workstation, on page 104
Chapter 5 - Working with the operator panel
Create a hotfolder
103