Oce VarioPrint 6000 User Manual Operating Information page 177

Note:
When you have more than one printer, you can exchange transaction setups. Go to
'Transaction Printing' - 'Setups' and use the 'Import' and 'Export' functions.
How to modify a transaction setup
Go to 'Transaction Printing' - 'Setups'.
1.
Put a checkmark in front of the transaction setup to select the setup you want to modify.
2.
Click the 'Edit' button, if you want to change the name of the setup.
3.
Change the settings under the 'IPDS setup' tab (see
4.
on page 175).
You can change the settings:
• by group (click the pencil at the right-hand side of the group settings). This is the
preferred method.
• by item (click the pencil behind the individual settings).
Change the settings under the 'PCL setup' tab (see
5.
on page 176).
Change the values under the 'Settings' tab.
6.
Note:
The status of the setup is changed to modified. You have to load the setup to make these
modification available on the printer.
Before you can load a transaction setup, you have to switch the transaction printing mode
off-line.
Go to 'Transaction Printing' - 'Settings', and click 'Toggle the transaction printing mode'
7.
to switch the printer off-line.
Go to back'Transaction Printing' - 'Setups'.
8.
Click 'Load'.
9.
The setup is now available on your operator panel.
'How to change the IPDS parameters'
'How to change the PCL parameters'
Chapter 5 - Working with the operator panel
Create a transaction setup
177