Assign The Media To A Paper Tray - Oce VarioPrint 6000 User Manual Operating Information

Assign the media to a paper tray

Introduction
The 'Trays' view has several functions (see
This section describes how to open the paper trays and assign the media in the 'Trays'
view.
Note:
The preferred way to load the required media is via the 'Schedule'. There you can select
a media and use the 'Load' button, or press the required media button 2 times.
Load and assign the media to a paper tray
On the operator panel, select the 'Trays' view.
1.
Touch the paper tray where you want to put the media, for example tray 2.
2.
Press 'Open'.
3.
Load the media (see
4.
Close the paper tray.
5.
Note:
There is a risk that a job is printed on a wrong media.
Press 'Assign'.
6.
A window with media names appears. The previous media in the selected paper tray is
highlighted.
Note:
The list displays all the media in the media catalog that match the position of the paper
guides inside the closed paper tray. When the list is empty, the media catalog does not
contain media that match the position of the paper guides.
Touch the name of the loaded media, for example Premium Label.
7.
Press 'OK'.
8.
Change the currently assigned media type
On the operator panel, select the 'Trays' view.
1.
Select the paper tray for which you want to change the assigned media type.
2.
Press 'Assign'.
3.
A window with media names appears.
'Load the media' on page
Chapter 5 - Working with the operator panel
Assign the media to a paper tray
'Introduction to the 'Trays' view' on page
47).
96).
99