Empty the waste box
Introduction
The waste box contains the paper chips that result from the punching process. The waste
box is located at the lower left-hand side of the puncher/folder (see
201).
When to do
The printer stops when the waste box is full. The operator panel displays a message. The
message asks you to empty the waste box of the puncher/folder.
Illustration
[126] Location of the waste box
Empty the waste box
Open the front door of the puncher/folder.
1.
Pull out the waste box.
2.
Empty the waste box.
3.
Push the waste box back into place.
4.
Chapter 6 - Optional finishers and other devices
Empty the waste box
'Main parts' on page
205