Fold the output
On the operator panel, press the 'Jobs' button.
1.
In the list of 'Waiting jobs' or 'Scheduled jobs', touch the job you want to edit.
2.
Press 'Properties'.
3.
Note:
You can also press the job 2 times to access the 'Properties' window. This function is
comparable to double-clicking with a mouse.
Press 'Folding'.
4.
Select the desired folding method.
5.
If required, define the other settings for the output.
6.
Enter the generic parameters in the 'Job' section.
7.
Press 'OK'.
8.
Chapter 5 - Working with the operator panel
Punch or fold the output
93