Oce VarioPrint 6000 User Manual Operating Information page 125

Setting Values
'Offset stack- 'Jobs'
ing'
'Sets (always)'
'Sets (as in
job)'
'Banners'
'Off'
Effect
Each printed job that is delivered to an output lo-
cation is stacked on top of the previous printed
job with an offset. This helps you to identify the
various jobs.
The offset stacking is defined per N sets. By de-
fault, this number is 1. If a number is specified,
this specified number of printed sets of a job will
be delivered to an output location in one straight
stack, the next number of printed sets are stacked
with an offset. When the number of requested sets
in a job is lower than or equal to N, the sets are
not stacked with an offset. However, the whole
job is stacked with an offset with respect to the
previous job.
Each printed set is delivered to the output location
as indicated in the job ticket. Therefore, the sets
can be stacked in one straight line or with an offset.
Each banner page of a job is delivered to the out-
put location with an offset. This helps you to
identify the separate jobs. The jobs themselves are
stacked in one straight line.
All the printed jobs or sets are stacked in one
straight line. There is no offset between the jobs
or sets.
Chapter 5 - Working with the operator panel
Work with the workflow profiles
125