Hardware
Mount
1.
Check the direction of the cooling fan.
There are connecters on the bottom left end seen from the front of the server.
The cooling fan is configured not to be inserted with the rear and front sides reversed.
Cooling Fan 2
Connector
Cooling Fan 1
Connector
2. Hold openings on the top of a new cooling fan with forefingers and put it down slowly along
its guide.
3. Push the cooling fan from the top until the lock levers are locked with a click sound.
IMPORTANT:
Pay attention to the direction of a cooling fan when mounting the
cooling fan. Check its front and rear sides as it is configured not to
be inserted with the rear and front sides reversed.
Front Side
196