NEC Express 5800 User Manual page 8

SAFETY NOTES
This section provides notes on using your server safely. Read this section carefully to ensure proper
and safe use of the server. For symbols, see "SAFETY INDICATIONS" provided earlier.
General
Do not use the server for services where critical high availability may directly affect
human lives.
Your server is not intended to be used with or control facilities or devices concerning
human lives, including medical devices, nuclear facilities and devices, aeronautics and
space devices, transportation facilities and devices; and facilities and devices requiring
high reliability. NEC assumes no liability for any accident resulting in personal injury,
death, or property damage if the server has been used in the above conditions.
Do not use the server if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the POWER/SLEEP switch and
disconnect the power plug from the outlet, then contact your service representative.
Using the server in such conditions may cause a fire.
Keep needles or metal objects away from the server.
Do not insert needles or metal objects into ventilation holes in the server or openings in
the optical disk drive. Doing so may cause an electric shock.
Do not use the server in any unapproved place.
Install the server on a standard EIA 19-inch rack cabinet. Do not install the rack
containing the server in a place inappropriate to the rack installation environment.
Failure to follow these instructions may cause some bad influences to be imposed on
your server and other systems installed on the rack and also a fire or personal injury
due to falling of the rack may occur. For the detailed explanation on the place where
your server should be installed and the earthquake-resistant construction for the rack,
refer to the manual attached to the rack or contact your service representative.
Always install the server on a rack conforming to the relevant standard.
Install the server on a rack confirming to the EIA standard for the server to be used. Do
not use the server with installed on any other rack than standard EIA 19-inch rack or
without the installation on a proper rack. Failure to follow these instructions may cause
your server to operate incorrectly and/or personal injury or damages of surrounding
devices to occur. Contact your service representative for the racks available for your
server.
viii