1.8.1
Enable/Disable Component
Enable/Disable Component is displayed by selecting "Fault Information" and clicking
"Enable/Disable" of the menu on the left side of the screen.
There are no system level components that an operator can enable or disable on the system web
console.
(1)
Display/set Enable/Disable status.
Contents to be displayed are as follows.
Setting
Name
(2)
Clicking "Submit" enables to set the information of (1).
(3)
Clicking "Cancel" enables to move to Fault Information screen.
6
There are no sensors which should be displayed on system web console.
7
Not supported in system web console.
(2)
: Enable/Disable status
: Disable sensor name
(3)
6
424
7
(1)