Led Description; Expressscope® Monitor Led - NEC Express 5800 User Manual

Hardware

LED Description

The following shows LED display and its description of the server.
EXPRESSSCOPE® Monitor LED
(1) (2)
(1) System Power LED
(2) System Status LED ( refer to the next page in addition to the following table for details).
(3) ID LED
This is used to check the position of the server, and can light the LED on/off by using the ID
button of EXPRESSSCOPE® Monitor, the ID button of management module on the rear of
the server, or Web Console as a console.
For example, the position of a server can be confirmed by lighting the ID LED of the target
server to be operated or maintained when multiple servers are installed.
Be sure to turn the LED off when there is no need to confirm the position.
There is also an ID LED operated in the same way on the management module on the rear
of the server.
The following table describes LED status and its description.
Display
(1)
(2)
(3) ID
(3)
LED Status
Off
Lighting in green
Off
Lighting in green
Lighting in amber
Off
Lighting in blue
DC Off (turn off DC in all Partitions）
DC On (turn On DC in one or more Partitions)
System stopped
System running (normal operation)
Fatal error/failure
Normal operation
Lights when checking the position of the server.
110
Front of Server
Description