NEC Express 5800 User Manual page 226

Hardware
enabled,the DHCP will be disabled.
・When selecting "View DHCP GUID", the Device GUID prints. The GUID is used for the DHCP client
id.
If the network address is configured, below screen will be displayed at first.
P ｌ e
When the network configuration completes, below screen will be displayed.
F i n
If the network configuration takes a long time, below screen will be displayed. Press "OK" to move
thefirst screen(Please wait).
N e
t a k
r e s s
P
N e w o r k
t
a
s e w a i t
N e w o r k
t
i
s h !
w o r k S e
t
i
n g l o n g
O K
IMPORTANT:
 It will take almost 10 seconds to apply the IP address which is
set newly because conflict check is done before applying it.
 If any confliction is detected, the new IP address will not be
applied and the IP address and the subnet mask will be treated
as 0.0.0.0. However the gateway address will be remained.
 IP addresses shown below are not available as they are
already reserved within the server.
172.24.0.0/16
172.16.0.0/16
S e t t i n g
S e t t i n g
O K
P r e
s s
t t i n g
m e
i
t
t c o n
o t i n u e
226
i s
.