Telnet Connecting; Ssh Connecting - NEC Express 5800 User Manual

TELNET Connecting

To start up SMASH-CLP using TELNET protocol, connect TCP(Port 23) to the IP address of the
management firmware from the terminal software.If the prompt such as below is displayed, then
input "User Name" and "Password". If the authentication of the user failed, the network is
disconnected compulsory.

SSH Connecting

To start up SMASH-CLP using SSH protocol, connect TCP(Port 22) to the IP address of the
management firmware from the terminal software.
The security warning message such as below is displayed when it is the first time to connect.The
description of the message is different for each software.Ensure that the connection is correct.
525