NEC Express 5800 User Manual page 290

Hardware
TPM Active Status
TPM Owner Status
(Note 1) The parameter is selectable when Administrator privilege exists
(Note 2) The parameter is selectable when "TPM SUPPORT " is set to "Enable"
(Note 3) The parameter is selectable when "TPM State" is set to "Enable"
(Note 4) The parameter cannot be set to "Disable" when "Intel(R) TXT" parameter in Intel(R) TXT
Configuration menu is set to "Enabled"
(Note 5) The parameter cannot be set to "TPM Clear" when "Intel(R) TXT" parameter in Intel(R) TXT
Configuration menu is set to "Enabled"
-
-
290
Display the activation status
for TPM (display only)
Display the ownership for
TPM (display only)
[ ]: Factory default