NEC Express 5800 User Manual page 530

・ exit
The format of exit command is shown below.
exit
・ help
The format of help command is shown below.
help [<help topics>]
Below are the examples.
-> help
COMMAND COMPLETED :
help
Command Name: Help
SMASH CLP is a command line interface for the remote user to the server. The
commands are of the form of <verb><options><targets><target-properties>.
Commands List:
cd
Dump
Exit
Help
Load
Reset
Set
Show
Start
Stop
Version
HINT:
•Before executing this command, the TFTP server should be
configured. Because
protocol,the security setting might be required depending on
the user's environment.
By pressing CTRL + C, it is possible to interrupt the command
during TFTP network communication.
•SG,System Genaration, means the configuration settings for
the system.
"UDP/69 is
530
used for the TFTP