NEC Express 5800 User Manual page 372

Hardware
Setting level of Universal RAID Utility and the setting value
Item
Rebuild Priority
Rebuild Rate (WebBIOS)
Patrol Read Priority
Patrol Read Rate (WebBIOS)
Consistency Check Priority
CC Rate (WebBIOS)
Setting level of URU
High
Middle
Low
High
Middle
Low
High
Middle
Low
NOTE:
●WebBIOS can set BGI Rate (Background Initialize Priority). But
Universal RAID Utility cannot set it.
●Universal RAID Utility can set Initialization Priority. But, Internal
RAID Controller does not have the function of the setting of
Initialization Priority. Therefore, Universal RAID Utility does not
display [Initialization Priority] in the property of RAID Controller.
Also, it will fail that you change the Initialization Priority by
raidcmd.
Setting value
90
50
10
90
50
10
90
50
10
372