NEC Express 5800 User Manual page 134

Hardware
10. Attach the inner rail removed in step 2 to the server at six positions on the right side and six
positions on the left side (total 12 positions) by using screw B.
11. Mount the server from the front of the rack along the mounted rail assembly by using a lifter.
Push the release lever shown below to unlock before inserting the server
Confirm that there is no obstruction in the location for mounting the server to the rack such
as rear of rack, etc. or the handle is placed downwardly before mounting the server.
IMPORTANT:
●Install the stabilizer to the front bottom of the rack first when mounting the
server to the rack.
Release Lever
CAUTION
●Be careful not to catch your finger when pressing the release lever
to mount the server into a rack.
134
Handle