Switching Zones; Setting The Zone For Which The Sub Remote Control Unit Is Used (Zone Select Lock Mode); Setting The Remote Id; Resetting The Settings - Denon AVP-A1HDE Owner's Manual

Switching Zones

Use this procedure to select the zone to be operated by the sub
remote control unit.
1
[ZONE SELECT]
Press .
The currently selected multi-zone indicator lights.
2
While the multi-zone indicator is light, press
SELECT]
to select the zone to be operated.
The currently selected multi-zone indicator lights.
Setting the Zone for Which the Sub
Remote Control Unit is Used (ZONE
SELECT LOCK Mode)
We recommend always using the sub remote control unit for the
same room. When this is done, the unit can be set so that the
zone does not switch when buttons are operated.
1
[ADVANCED SETUP]
Use the tip of a pen to press
All the multi-zone indicators light.
2
Select the multi-zone to be set.
The selected multi-zone indicator lights.
[REPEAT]
q T o set to "MAIN ZONE" : Press
[RANDOM]
w T o set to "ZONE2" : Press
[USB]
e T o set to "ZONE3" : Press .
[ALL MUSIC/FAVORITES]
r T o set to "ZONE4" : Press
3
[ADVANCED SETUP]
Use the tip of a pen to press
The multi-zone indicator turns off.
To Cancel
1
Use the tip of a pen to press
The currently selected multi-zone indicator lights.
2
[ZONE SELECT]
Press
All the multi-zone indicators light.
3
[ZONE
Use the tip of a pen to press
The multi-zone indicator turns off.

Setting the Remote ID

When using multiple DENON AV receivers in the same room,
make this setting so that no AV receiver other than the desired
one operates.
1
While pressing
with the tip of a pen.
The multi-zone indicator corresponding to the currently selected
remote ID flashes.
.
2
Select the remote ID to be set.
q T o set to 1 : Press
The "M" indicator flashes.
.
w T o set to 2 : Press
.
The "Z2" indicator flashes.
e T o set to 3 : Press
.
The "Z3" indicator flashes.
r T o set to 4 : Press
.
The "Z4" indicator flashes.
3
While pressing
with the tip of a pen.
The multi-zone indicator turns off.
NOTE
When changing a setting, be sure to set the same remote ID as the
AVP-A1HD's (vpage 42).
[ADVANCED SETUP]
.
.
[ADVANCED SETUP]
.
[MENU] [ADVANCED SETUP]
, press
[REPEAT]
.
[RANDOM]
.
[USB]
.
[ALL MUSIC/FAVORITES]
.
[MENU] [ADVANCED SETUP]
, press

Resetting the Settings

[ZONE OFF] [ADVANCED SETUP]
While pressing , press
with the tip of a pen.
All the multi-zone indicators flash 4 times, then all the settings are
restored to their defaults.