General Setup - ZyXEL Communications MES3500-24F User Manual

Chapter 8 Basic Setting

8.3 General Setup

Use this screen to configure general settings such as the system name and time. Click Basic
Setting > General Setup in the navigation panel to display the screen as shown.
Figure 29 Basic Setting > General Setup
The following table describes the labels in this screen.
Table 10 Basic Setting > General Setup
LABEL
System Name
Location
Contact Person's
Name
Use Time Server
when Bootup
Time Server IP
Address
Current Time
88
DESCRIPTION
Choose a descriptive name for identification purposes. This name consists of up to 64
printable characters; spaces are allowed.
Enter the geographic location of your Switch. You can use up to 32 printable ASCII
characters; spaces are allowed.
Enter the name of the person in charge of this Switch. You can use up to 32 printable
ASCII characters; spaces are allowed.
Enter the time service protocol that your timeserver uses. Not all time servers support all
protocols, so you may have to use trial and error to find a protocol that works. The main
differences between them are the time format.
When you select the Daytime (RFC 867) format, the Switch displays the day, month,
year and time with no time zone adjustment. When you use this format it is recommended
that you use a Daytime timeserver within your geographical time zone.
Time (RFC-868) format displays a 4-byte integer giving the total number of seconds
since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None is the default value. Enter the time manually. Each time you turn on the Switch, the
time and date will be reset to 1970-1-1 0:0.
Enter the IP address of your timeserver. The Switch searches for the timeserver for up to
60 seconds. If you select a timeserver that is unreachable, then this screen will appear
locked for 60 seconds. Please wait.
This field displays the time you open this menu (or refresh the menu).
MES3500-24/24F User's Guide