Maintenance; Chapter 37 Maintenance; The Maintenance Screen - ZyXEL Communications MES3500-24F User Manual

This chapter explains how to configure the screens that let you maintain the firmware and
configuration files.

37.1 The Maintenance Screen

Use this screen to manage firmware and your configuration files. Click Management >
Maintenance in the navigation panel to open the following screen.
Figure 166 Management > Maintenance
The following table describes the labels in this screen.
Table 116 Management > Maintenance
LABEL
Current
Firmware
Upgrade
Restore
Configuration
Backup
Configuration
Load Factory
Default
Save
Configuration
Reboot
System
MES3500-24/24F User's Guide
DESCRIPTION
This field displays which configuration (Configuration 1 or Configuration 2) is
currently operating on the Switch.
Click Click Here to go to the Firmware Upgrade screen.
Click Click Here to go to the Restore Configuration screen.
Click Click Here to go to the Backup Configuration screen.
Click Click Here to reset the configuration to the factory default settings.
Click Config 1 to save the current configuration settings to Configuration 1 on the
Switch.
Click Config 2 to save the current configuration settings to Configuration 2 on the
Switch.
Click Config 1 to reboot the system and load Configuration 1 on the Switch.
Click Config 2 to reboot the system and load Configuration 2 on the Switch.
Note: Make sure to click the Save button in any screen to save your settings to the
current configuration on the Switch.
C
HAPTER

Maintenance

3 7
283