Create An Ip-Based Vlan Example - ZyXEL Communications MES3500-24F User Manual

Table 20 Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN Setup
LABEL
Index
Active
Port
Name
Ethernet-type
VID
Priority
Delete
Cancel

9.10 Create an IP-based VLAN Example

This example shows you how to create an IP VLAN which includes ports 1, 4 and 8. Follow these
steps using the screen below:
Activate this protocol based VLAN.
1
Type the port number you want to include in this protocol based VLAN. Type 1.
2
Give this protocol-based VLAN a descriptive name. Type IP-VLAN.
3
Select the protocol. Leave the default value IP.
4
Type the VLAN ID of an existing VLAN. In our example we already created a static VLAN with an ID
5
of 5. Type 5.
MES3500-24/24F User's Guide
DESCRIPTION
This is the index number identifying this protocol based VLAN. Click on any of these
numbers to edit an existing protocol based VLAN.
This field shows whether the protocol based VLAN is active or not.
This field shows which port belongs to this protocol based VLAN.
This field shows the name the protocol based VLAN.
This field shows which Ethernet protocol is part of this protocol based VLAN.
This field shows the VLAN ID of the port.
This field shows the priority which is assigned to frames belonging to this protocol
based VLAN.
Click this to delete the protocol based VLANs which you marked for deletion.
Click Cancel to begin configuring this screen afresh.
Chapter 9 VLAN
109