Configure trunk groups or LACP before you connect the Ethernet switch to avoid causing network
topology loops.
17.2.1 Link Aggregation ID
LACP aggregation ID consists of the following information
Table 38 Link Aggregation ID: Local Switch
SYSTEM
PRIORITY
0000
Table 39 Link Aggregation ID: Peer Switch
SYSTEM
PRIORITY
0000
17.3 Link Aggregation Status
Click Advanced Application > Link Aggregation in the navigation panel. The Link Aggregation
Status screen displays by default. See
Figure 69 Advanced Application > Link Aggregation Status
The following table describes the labels in this screen.
Table 40 Advanced Application > Link Aggregation Status
LABEL
Group ID
Enabled Port
Synchronized
Ports
1.
Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
MES3500-24/24F User's Guide
MAC ADDRESS
00-00-00-00-00-00
MAC ADDRESS
00-00-00-00-00-00
Section 17.1 on page 148
DESCRIPTION
This field displays the group ID to identify a trunk group, that is, one logical link containing
multiple ports.
These are the ports you have configured in the Link Aggregation screen to be in the trunk
group.
The port number(s) displays only when this trunk group is activated and there is a port
belonging to this group.
These are the ports that are currently transmitting data as one logical link in this trunk
group.
1
:
KEY
PORT PRIORITY PORT NUMBER
0000
00
KEY
PORT PRIORITY PORT NUMBER
0000
00
for more information.
Chapter 17 Link Aggregation
0000
0000
149