ZyXEL Communications MES3500-24F User Manual page 295

Table 124 SNMP Switch Traps
OPTION OBJECT LABEL
stp STPNewRoot
MRSTPNewRoot
MSTPNewRoot
STPTopologyChange
MRSTPTopologyChange
MSTPTopologyChange
mactable MacTableFullEventOn
MacTableFullEventClear
rmon RmonRisingAlarm
RmonFallingAlarm
cfm dot1agCfmFaultAlarm
MES3500-24/24F User's Guide
OBJECT ID
1.3.6.1.2.1.17.0.1
1.3.6.1.4.1.890.1.5.8.68.36.2.1
1.3.6.1.4.1.890.1.5.8.57.36.2.1
1.3.6.1.4.1.890.1.5.8.68.107.70.1
1.3.6.1.4.1.890.1.5.8.57.107.70.1
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.890.1.5.8.68.36.2.2
1.3.6.1.4.1.890.1.5.8.57.36.2.2
1.3.6.1.4.1.890.1.5.8.68.107.70.2
1.3.6.1.4.1.890.1.5.8.57.107.70.2
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.68.27.2.2
1.3.6.1.4.1.890.1.5.8.57.27.2.2
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
1.3.111.2.802.1.1.8.0.1
Chapter 38 Access Control
DESCRIPTION
This trap is sent when the STP root switch
changes.
This trap is sent when the MRSTP root switch
changes.
This trap is sent when the MSTP root switch
changes.
This trap is sent when the STP topology
changes.
This trap is sent when the MRSTP topology
changes.
This trap is sent when the MSTP root switch
changes.
This trap is sent when more than 99% of the
MAC table is used.
This trap is sent when less than 95% of the
MAC table is used.
This trap is sent when a variable goes over
the RMON "rising" threshold.
This trap is sent when the variable falls
below the RMON "falling" threshold.
The trap is sent when the Switch detects a
connectivity fault.
295