Cluster Management Status - ZyXEL Communications MES3500-24F User Manual

41.2 Cluster Management Status

Click Management > Cluster Management in the navigation panel to display the following
screen.
Note: A cluster can only have one manager.
Figure 194 Management > Cluster Management: Status
The following table describes the labels in this screen.
Table 136 Management > Cluster Management: Status
LABEL
Status
Manager
The Number of
Member
Index
MacAddr
Name
Model
Status
MES3500-24/24F User's Guide
DESCRIPTION
This field displays the role of this Switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member switch directly and
not via the cluster manager)
None (neither a manager nor a member of a cluster)
This field displays the cluster manager switch's hardware MAC address.
This field displays the number of switches that make up this cluster. The following fields
describe the cluster member switches.
You can manage cluster member switches via the cluster manager switch. Each number in
the Index column is a hyperlink leading to the cluster member switch's web configurator
(see Figure 195 on page 318).
This is the cluster member switch's hardware MAC address.
This is the cluster member switch's System Name.
This field displays the model name.
This field displays:
Online (the cluster member switch is accessible)
Error (for example the cluster member switch password was changed or the switch was set
as the manager and so left the member list, etc.)
Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after the link
between cluster member and manager goes down)
Chapter 41 Cluster Management
317