Configure A Port-Based Vlan - ZyXEL Communications MES3500-24F User Manual

9.11.1 Configure a Port-based VLAN

Select Port Based as the VLAN Type in the Switch Setup screen and then click VLAN from the
navigation panel to display the following screen. Select either All Connected or Port Isolated
from the drop-down list depending on your VLAN and VLAN security requirements. If VLAN
members need to communicate directly with each other, then select All Connected. Select Port
Isolated if you want to restrict users from communicating directly. Click Apply to save your
settings.
The following screen shows users on a port-based, all-connected VLAN configuration.
Figure 44 Advanced Application > VLAN > Port Based VLAN Setup (All Connected)
MES3500-24/24F User's Guide
Chapter 9 VLAN
111