Enter 1 for both Start VID and End VID since both the Switch and PPPoE server are in VLAN 1 in
4
this example. Click Apply.
Then select Yes to enable PPPoE IA in VLAN 1 and also select Circuit-id and Remote-id to allow
5
the Switch to add these two strings to frames tagged with VLAN 1 and pass to the PPPoE server.
Click Apply.
6.3.2 Configuring Switch B
The example uses another MES3500-24/24F as switch B.
MES3500-24/24F User's Guide
Chapter 6 Tutorials
63