Configuring Vlan Mapping - ZyXEL Communications MES3500-24F User Manual

28.3 Configuring VLAN Mapping

Click the VLAN Mapping Configure link in the VLAN Mapping screen to display the screen as
shown. Use this screen to enable and edit the VLAN mapping rule(s).
Figure 131 VLAN Mapping Configuration
The following table describes the labels in this screen.
Table 89 VLAN Mapping Configuration
LABEL
Active
Name
Port
VID
Translated VID
Priority
Add
Cancel
Index
Active
Name
Port
VID
Translated VID
Priority
Delete
Cancel
MES3500-24/24F User's Guide
DESCRIPTION
Check this box to activate this rule.
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Type a port to be included in this rule.
Enter a VLAN ID from 1 to 4094. This is the VLAN tag carried in the packets and will be
translated into the VID you specified in the Translated VID field.
Enter a VLAN ID (from 1 to 4094) into which the customer VID carried in the packets will be
translated.
Select a priority level (from 0 to 7). This is the priority level that replaces the customer
priority level in the tagged packets or adds to the untagged packets.
Click Add to insert the entry in the summary table below and save your changes to the
Switch's run-time memory. The Switch loses these changes if it is turned off or loses power,
so use the Save link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
This is the number of the VLAN mapping entry in the table.
This shows whether this entry is activated or not.
This is the descriptive name for this rule.
This is the port number to which this rule is applied.
This is the customer VLAN ID in the incoming packets.
This is the VLAN ID that replaces the customer VLAN ID in the tagged packets.
This is the priority level that replaces the customer priority level in the tagged packets.
Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
Click Cancel to clear the Delete check boxes.
Chapter 28 VLAN Mapping
239