Syslog Setup - ZyXEL Communications MES3500-24F User Manual

Chapter 40 Syslog

40.2 Syslog Setup

Click Management > Syslog in the navigation panel to display this screen. The syslog feature
sends logs to an external syslog server. Use this screen to configure the device's system logging
settings.
Figure 191 Management > Syslog
The following table describes the labels in this screen.
Table 133 Management > Syslog
LABEL
Syslog
Logging Type
Active
Facility
Apply
Cancel
314
DESCRIPTION
Select Active to turn on syslog (system logging) and then configure the syslog setting
This column displays the names of the categories of logs that the device can generate.
Select this option to set the device to generate logs for the corresponding category.
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
MES3500-24/24F User's Guide