Example: Dhcp Relay For Two Vlans - ZyXEL Communications MES3500-24F User Manual

Table 115 IP Application > DHCP > VLAN (continued)
LABEL
Delete
Cancel

36.4.1 Example: DHCP Relay for Two VLANs

The following example displays two VLANs (VIDs 1 and 2) for a campus network. Two DHCP servers
are installed to serve each VLAN. The system is set up to forward DHCP requests from the
dormitory rooms (VLAN 1) to the DHCP server with an IP address of 192.168.1.100. Requests from
the academic buildings (VLAN 2) are sent to the other DHCP server with an IP address of
172.16.10.100.
Figure 164 DHCP Relay for Two VLANs
VLAN 1
VLAN 2
For the example network, configure the VLAN Setting screen as shown.
Figure 165 DHCP Relay for Two VLANs Configuration Example
MES3500-24/24F User's Guide
DESCRIPTION
Select the configuration entries you want to remove and click Delete to remove them.
Click Cancel to clear the Delete check boxes.
DHCP: 192.168.1.100
DHCP: 172.16.10.100
Chapter 36 DHCP
281