ZyXEL Communications MES3500-24F User Manual page 294

Chapter 38 Access Control
Table 121 SNMP Interface Traps (continued)
OPTION OBJECT LABEL
lldp LLDPRemoteTopologyChange
transceiver transceiverddmiEventOn
-ddmi
transceiverddmiEventClear
Table 122 AAA Traps
OPTION OBJECT LABEL
authentication authenticationFailure
AuthenticationFailureEventOn
RADIUSNotReachableEventOn
RADIUSNotReachableEventCle
ar
accounting RADIUSNotReachableEventOn
RADIUSNotReachableEventCle
ar
Table 123 SNMP IP Traps
OPTION OBJECT LABEL
ping pingProbeFailed
pingTestFailed
pingTestCompleted
traceroute traceRoutePathChange
traceRouteTestFailed
traceRouteTestCompleted
294
OBJECT ID
1.0.8802.1.1.2.0.0.1
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.68.27.2.2
1.3.6.1.4.1.890.1.5.8.57.27.2.2
OBJECT ID
1.3.6.1.6.3.1.1.5.5
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.68.27.2.2
1.3.6.1.4.1.890.1.5.8.57.27.2.2
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.68.27.2.2
1.3.6.1.4.1.890.1.5.8.57.27.2.2
OBJECT ID DESCRIPTION
1.3.6.1.2.1.80.0.1 This trap is sent when a single ping probe fails.
1.3.6.1.2.1.80.0.2 This trap is sent when a ping test (consisting of a series
of ping probes) fails.
1.3.6.1.2.1.80.0.3 This trap is sent when a ping test is completed.
1.3.6.1.2.1.81.0.1 This trap is sent when a path to a target changes.
1.3.6.1.2.1.81.0.2 This trap is sent when a traceroute test fails.
1.3.6.1.2.1.81.0.3 This trap is sent when a traceroute test is completed.
DESCRIPTION
This trap is sent when the LLDP (Link Layer
Discovery Protocol) remote topology
changes.
This trap is sent when one of the device
operating parameters (such as transceiver
temperature, laser bias current,
transmitted optical power, received optical
power and transceiver supply voltage) is
above or below a factory set normal range.
This trap is sent when all device operating
parameters return to the normal operating
range.
DESCRIPTION
This trap is sent when authentication
fails due to incorrect user name and/or
password.
This trap is sent when authentication
fails due to incorrect user name and/or
password.
This trap is sent when there is no
response message from the RADIUS
server.
This trap is sent when the RADIUS
server can be reached.
This trap is sent when there is no
response message from the RADIUS
accounting server.
This trap is sent when the RADIUS
accounting server can be reached.
MES3500-24/24F User's Guide