Vlan Status - ZyXEL Communications MES3500-24F User Manual

Chapter 9 VLAN

9.5.1 VLAN Status

See Section 9.1 on page 97
VLAN from the navigation panel to display the VLAN Status screen as shown next.
Figure 35 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
Table 15 Advanced Application > VLAN: VLAN Status
LABEL
VLAN Search
by VID
The Number of
VLAN
The Number of
Search Results
Index
VID
Elapsed Time
Status
Change Pages
100
for more information on Static VLAN. Click Advanced Application >
DESCRIPTION
Enter an existing VLAN ID number(s) (separated by a comma) and click Search to display
only the specified VLAN(s) in the list below.
Leave this field blank and click Search to display all VLANs configured on the Switch.
This is the number of VLANs configured on the Switch.
This is the number of VLANs that match the searching criteria and display in the list below.
This field displays only when you use the Search button to look for certain VLANs.
This is the VLAN index number. Click on an index number to view more VLAN details.
This is the VLAN identification number that was configured in the Static VLAN screen.
This field shows how long it has been since a normal VLAN was registered or a static VLAN
was set up.
This field shows how this VLAN was added to the Switch; dynamic - using GVRP, static -
added as a permanent entry or other - added in another way such as via Multicast VLAN
Registration (MVR).
Click Previous or Next to show the previous/next screen if all status information cannot be
seen in one screen.
MES3500-24/24F User's Guide