Configuring Dhcp Relay - ZyXEL Communications MES3500-24F User Manual

Enter 102 in the PVID field for port 2 to add a tag to incoming untagged frames received on that
9
port so that the frames are forwarded to the VLAN group that the tag defines.
10 Click Apply to save your changes back to the run-time memory.
11 Click the Save link in the upper right corner of the web configurator to save your configuration
permanently.

6.2.3 Configuring DHCP Relay

Follow the steps below to enable DHCP relay on the Switch and allow the Switch to add relay agent
information (such as the VLAN ID) to DHCP requests.
Click IP Application > DHCP and then the Global link to open the DHCP Relay screen.
1
Select the Active check box.
2
Enter the DHCP server's IP address (192.168.2.3 in this example) in the Remote DHCP Server 1
3
field.
Select the Option 82 and the Information check boxes.
4
MES3500-24/24F User's Guide
Chapter 6 Tutorials
59