Adjusting The Angle Of The Bilateral Contracture Footplate - Invacare Solara 3G User Manual

15.2 Adjusting the Angle of the Bilateral Contracture Footplate

Adjusting the Side to Side Angle
1. Loosen the adjustment screw located underneath the contracture footplate. See Detail "A".
2. Tilt the contracture footplate left or right to the desired angle. See Detail "B".
3. Retighten the adjustment screw.
4. If necessary, repeat STEPS 1-3 on remaining contracture footplate.
Part No 1154295
DETAIL "A"
Adjustment
Contracture
Screw
Footplate
FIGURE 2 Adjusting the Angle of the Contracture Assembly
15 CONTRACTURE FOOT ASSEMBLY
103
Invacare® Solara®3G/Spree 3G Wheelchair
DETAIL "B"
Contracture
Footplate
Adjustment
Screw