Adjusting The Footplate Angle; Adjusting The Tension Of The Flip Up Footplate - Invacare ASBA User Manual

7.24 Adjusting the Footplate Angle

Manual Center Mount Footrest is shown for reference A.
Rear view of footplate C is shown for clarity.
1. Flip footplate up.
Rotate the adjustment screw B in or out until the desired angle
2.
is achieved.
3. Repeat STEPS 1 and 2 for the other footplate.
1143192-L-03
7.25 Adjusting the Tension of the Flip Up
Footplate
The tension can be adjusted to increase or decrease the
rotation effort of the flip up footplates A.
Loosen the mounting screw B on the front rigging angle hinge to
1.
decrease the rotation effort.
DO NOT remove the footplate mounting screw.
2. Tighten the front rigging angle hinge mounting screw to increase
the rotation effort.
3. Repeat STEPS 1 and 2 for the other footplate.
Setup Maintenance
49