8 Arms
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
8.1
Installing/Removing Dual Point Armrests (Fixed And Adjustable Height)
WARNING
Make sure the locking mechanism is secured before using wheelchair.
Installing Armrest
1.
Unlock armrest assembly by flipping the arm assembly release lever located on the side rail to the UP (horizontal) position (Detail "A")..
Armrest locks MUST be in the unlocked position when placing arm into the arm sockets.
2.
Install armrest assembly into the arm sockets.
3.
When installed, lock the armrest assembly by pressing the release lever into the down (vertical) position (Detail "A").
4.
Repeat STEPS 1-3 for the opposite side of the wheelchair.
5.
For adjustable height dual point armrests, adjust the height if necessary. Refer to Adjusting the Height of the Adjustable Height Armrests on
page 51.
Removing Armrest
1.
Unlock armrest assembly by flipping the arm assembly release lever located on the side rail to the up (horizontal) position (Detail "A").
2.
Pull up on the armrest assembly to remove the armrest from the arm socket.
3.
Repeat STEPS 1-2 for opposite side of wheelchair, if necessary.
Part No 1154295
49
Invacare® Solara®3G/Spree 3G Wheelchair
8 ARMS