11 VENT TRAY
11 Vent Tray
11.1 Adjusting the Vent Tray Height
1.
Remove the two mounting screws and two locknuts that secure the front vent tray hanger bracket to the front cross tube.
2.
Remove the four mounting screws, eight washers and four locknuts that secure the rear vent tray hanger brackets to the wheelchair frame.
3.
Adjust the vent tray to the desired height
All three vent tray hanger brackets should be adjusted to the same height adjustment hole.
4.
Secure the front vent tray hanger bracket to the wheelchair frame with two mounting screws and locknuts. Tighten securely.
5.
Secure the rear vent tray hanger brackets to the wheelchair frame with four mounting screws, eight washers and four locknuts. Tighten securely.
Invacare® Solara®3G/Spree 3G Wheelchair
.
82
Part No 1154295