Invacare Solara 3G User Manual page 109

Replacing the Contracture Footplate Heel Loop
 This procedure applies to the bilateral contracture
footplate only.
1. Tilt the contracture footplate forward to gain access to the
mounting screws that secure the heel loop to the underside of the
contracture footplate. Refer to Adjusting the Angle of the Bilateral
Contracture Footplate on page 103.
2. Remove the four mounting screws and washers that secure the
existing heel loop to the contracture footplate.
3. Reverse STEPS 1-2 to install the new heel loop.
Part No 1154295
15 CONTRACTURE FOOT ASSEMBLY
Mounting Screws
Washers
FIGURE 8 Replacing the Contracture Footplate Heel Loop
109
Invacare® Solara®3G/Spree 3G Wheelchair
Washers
Contracture
Footplate
Heel Loop