Adjusting Footplate Angle; Adjusting Footplate Depth - Invacare Top End Crossfire T6 Owner's Operator And Maintenance Manual

Adjusting Footplate Angle

1. Loosen, but DO NOT remove the two mounting screws and locknuts that secure the
footplate to the two footrest tubes.
2. Position the footplate to the necessary angle to accommodate the user.
3. Retighten the two mounting screws and locknuts.
NOTE: The locknuts should lie in the channel of the footplate clamp.

Adjusting Footplate Depth

1. Remove the two mounting screws and locknuts that secure footplate to the footrest
tubes.
NOTE: Observe the angle of footplate for reinstallation.
2. Move the footplate to one of two mounting positions to accommodate the user.
3. Using the two mounting screws and locknuts, secure the footplate to the footrest
tubes.
NOTE: The locknuts should lie in the channel of the footplate half clamp.
Mounting
Positions
Wheelchair
Frame
Clamp
(Allen Screw)
Footrest
Tube
FIGURE 4.3 Replacing/Adjusting Optional Adjustable Angle Footrest
Part No 1134872
Clamp
(Allen
Screw)
Mounting
Screws
Locknuts
Footplate
29
SECTION 4—FOOTREST
Adjustments
Crossfire
Depth
Angle
Height
™
Series Wheelchairs