Adjusting Trigger Release Cables - Invacare Solara 3G User Manual

iii. Slowly, push down on the back canes while pulling up on the trigger release levers in a continuous motion.
iv. When the seat reaches the desired angle, slowly let go of the trigger release levers.
B. For Foot Operated Tilt (Detail "B"):
i. Push down on the foot lever to release the tilt mechanism from the gear rack.
ii. Slowly, push down on the back canes while keeping the foot lever depressed.
iii. When the seat reaches the desired angle, release the foot lever.
DETAIL
"A"
Trigger
Release
Lever
Gear
Rack

10.2 Adjusting Trigger Release Cables

WARNING
DO NOT adjust the trigger release cables while the cables are coiled up. The adjustment will be too tight when the cable is
straightened and the tilt mechanism will not lock and hold its position, possibly causing injury.
Part No 1154295
Tilt
Mechanism
FIGURE 1 Engaging Tilt-In-Space
75
Invacare® Solara®3G/Spree 3G Wheelchair
10 TILT
DETAIL
"B"
Foot Lever