Invacare Solara 3G User Manual page 89

Socket Screws
(Behind Handle)
Wheel Lock Assembly
Footlock
When changing the position of the rear wheels, the wheel locks MUST be repositioned.

Before adjusting or replacing the wheel lock assemblies, ensure that the tires are inflated to the recommended p.s.i on the
side wall of the tire.
1. Loosen, but DO NOT remove the four mounting screws (two mounting screws on each side) that secure the wheel lock bracket to the
wheelchair frame. (Detail "A")
2. Measure the distance between the wheel lock shoe and the rear wheel.
3. Slide the wheel lock bracket along the wheelchair frame until the measurement between the wheel lock shoe and rear wheel is approximately
1.25 inches. If 1.25 inch measurement is not achievable, perform the following:
A. Remove the mounting screw, washers and locknut that secure the connecting wheel link to the footlock lever (Detail "B").
Part No 1154295
Wheel Lock
Shoe
FIGURE 1 Wheel Lock Adjustment - Push to Lock or Pull to Lock Wheel locks
13 WHEEL LOCKS/ANTI-TIPPERS
DETAIL "A" -
TOP VIEW
Socket
Screws
Wheel Lock Shoe
89
Invacare® Solara®3G/Spree 3G Wheelchair
Wheel Lock Mounting Bracket
Wheel Lock
Assembly
Rear Wheel