6 Maintenance
6.1
Maintenance Safety Precautions
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may result.
Replace any labels that are missing, worn, or torn. Refer to Label Locations on page 12 for a listing of the labels and their
locations
CAUTION
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing.
6.2
Suggested Maintenance Procedures
1.
Before using your wheelchair, make sure all nuts and bolts are tight.
2.
Check all parts for damage or wear and replace.
3.
Check all parts for proper adjustment.
4.
Keep quick-release axles free of dirt and lint to ensure positive locking and proper operation. Refer to Adjusting The Quick-Release Axle on
page 86.
WARNING
DO NOT use WD-40
damage to the wheelchair may occur.
5.
Clean quick-release axles once a week with a Teflon
Part No 1154295
®
®
, 3-in-1 oil
, or other penetrating lubricants on quick-release axles. Otherwise, binding and/or
®
lubricant.
35
Invacare® Solara®3G/Spree 3G Wheelchair
6 MAINTENANCE