Invacare Solara 3G User Manual page 90

13 WHEEL LOCKS/ANTI-TIPPERS
B. Slide the wheel lock bracket along the wheelchair frame until the measurement between the wheel lock shoe and rear wheel is
approximately 1.25 inches.
C. Secure the foot lock lever to the connecting wheel lock link in the corresponding adjustment hole.
D. Repeat STEPS 3 for remaining wheel lock bracket.
4. Tighten the four mounting screws to 50 inch pounds.
5. Engage the footlock and push against the wheelchair to determine if the footlock engages the rear wheels enough to hold the wheelchair.
6. Repeat STEPS 1-5 until the footlock engages the rear wheels enough to hold the wheelchair.
DETAIL "A"
Mounting
Screws
Wheelchair
Frame
Wheel Lock Bracket
Invacare® Solara®3G/Spree 3G Wheelchair
Wheel Lock
Shoe
Rear Wheel
FIGURE 2 Wheel Lock Adjustment - Footlock
Foot Lock Lever
Locknut
Washers
Mounting
Screw
Adjustment
Holes
Connecting Wheel
90
DETAIL "B"
Lock Link
Part No 1154295