15.3 Depth Adjustment
Bilateral Contracture Footplate
1.
Remove the two flat screws and locknuts that secure the contracture footplate to the footplate angle bracket.
2.
Move the contracture footplate to one of four mounting holes.
3.
Reinstall the four flat screws and locknuts that secure the contracture footplate to the footplate angle bracket. Tighten securely.
4.
If necessary, repeat STEPS 1-3 on remaining contracture footplate.
Part No 1154295
Locknuts
(Underneath)
FIGURE 4 Depth Adjustment - Bilateral Contracture Footplate
15 CONTRACTURE FOOT ASSEMBLY
Mounting Holes
Footplate Angle Bracket
105
Invacare® Solara®3G/Spree 3G Wheelchair
Contracture
Footplate
Flat Screws