7.8
Replacing Bolt On Sector Block
1.
Remove the mounting screw and washer that secure the existing
sector block to the front rigging support tube.
2.
Position the new sector block on the front rigging support tube.
Make sure the locking pin is facing up.
3.
Secure the new sector block to the front rigging support tube with
the existing mounting screw and washer.
7.9
Replacing Clamp on Sector Block
1.
Remove the two mounting screws and washers that secure the
support bracket and sector block to the front rigging support tube.
2.
Position the new sector block on the front rigging support tube.
Make sure the locking pin is facing up
3.
Secure the new sector block to the front rigging support tube with
the existing mounting screws and washers. Tighten securely.
Part No 1154295
Front Rigging
Support Tube
Locking Pin
FIGURE 9
Mounting
Washer
Screw
Locking Pin
FIGURE 10
47
Invacare® Solara®3G/Spree 3G Wheelchair
7 FRONT RIGGINGS
Mounting
Screw
Washer
Sector Block
Replacing Bolt On Sector Block
Front Rigging
Support Tube
Mounting
Screw
Washer
Sector Block
Replacing Clamp on Sector Block