Adjusting Footrest Height - Invacare Solara 3G User Manual

Hide thumbs Also See for Solara 3G:
Table of Contents

Advertisement

7.2

Adjusting Footrest Height

Height Adjustment Ranges
60° footrest - Range:13-17 inches, 70° footrest - Range:13-17 inches, 90° footrest - Range: 5-8 inches, 90° footrest - 5-11
inches (with 3 inch extension)
If using ANY type of extension with the adjustable flip-up footplate. Refer to Adjusting Adjustable Angle Flip-Up Footplates
on page 42.
60°, 70° and 70° Taper
1.
Remove the footrest from the wheelchair. Refer to Installing/Removing Footrests on page 38.
2.
Remove the hex screw and coved spacer and slide the footrest up or down on its mounting tube until the desired footrest height is achieved.
3.
Reassemble the hex screw and coved spacer through the footrest upper support and mounting tube.
Part No 1154295
Footrest Release
Lever
Mounting Tube
Wheelchair
Frame
FIGURE 1 Installing/Removing Footrests
Mounting Pin
Footrest
Assembly
Footplate
39
Invacare® Solara®3G/Spree 3G Wheelchair
7 FRONT RIGGINGS
Only 60° Footrest shown for
clarity. Others will attach the
same way.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spree 3g

Table of Contents