Installing/Replacing Seat Positioning Straps - Invacare Solara 3G User Manual

9 BACK/SEAT
9.6

Installing/Replacing Seat Positioning Straps

Installing
1. Remove the hex screw and locknut that secures the back cane to
the back plate.
2. Position the seat positioning strap against the back plate.
3. Install the hex screw through the seat positioning strap, coved
spacers and back cane.
4. Securely tighten the seat positioning strap to the wheelchair with
the locknut.
5. Repeat STEPS 1-4 for opposite side.
Replacing
1. Remove the hex screw, locknut and seat positioning strap from the
back plate of the wheelchair frame.
2. Discard existing seat positioning strap.
3. Install the new seat positioning strap to the wheelchair. Refer to
Installing/Replacing Seat Positioning Straps on page 72.
Invacare® Solara®3G/Spree 3G Wheelchair
Adjustable Angle
Stroller Handle
Button
FIGURE 6 Adjusting the Adjustable Angle Stroller Handles
Hinge Arm
Back Plate
Seat Positioning Strap
Hex Screw
FIGURE 7 Installing/Replacing Seat Positioning Straps
72
Back Cane
Locknut
Coved
Spacers
Part No 1154295