4 SAFETY INSPECTION/TROUBLESHOOTING
❑
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Ensure that casters are free of debris.
❑
Ensure wheel locks DO NOT interfere with tires when rolling.
❑
Ensure wheel lock pivot points are free of wear and looseness.
❑
Ensure wheel locks are easy to engage.
❑
Inspect tires for flat spots and wear.
❑
Check pneumatic tires for proper inflation.
❑
Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑
Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑
Ensure hand grips are not loose.
❑
Ensure wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Ensure that casters are free of debris.
❑
Check pneumatic tires for proper inflation.
Inspect/Adjust Monthly
❑
Ensure sealed bearings and axle nut tension are correct..
❑
Ensure there is no excessive side movement or binding when drive wheels are lifted and spun.
❑
Adjust bearing system if wheel wobbles noticeably or binds to a stop.
❑
Inspect tires for flat spots and wear.
❑
Ensure wheel locks DO NOT interfere with tires when rolling.
❑
Ensure wheel lock pivot points are free of wear and looseness.
❑
Ensure wheel locks are easy to engage.
❑
Inspect axles to ensure they are free from dirt, lint, etc.
❑
Inspect tilt slides and roller bearings to ensure they are free from dirt, lint, etc.
❑
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.
Replace if necessary.
Invacare® Solara®3G/Spree 3G Wheelchair
32
Part No 1154295