17 CONTRACTURE FOOT ASSEMBLY
17.2 Adjusting the Angle of the Bilateral Contracture Footplate
Adjusting the Side to Side Angle
1.
Loosen the adjustment screw located underneath the contracture footplate. See Detail "A".
2.
Tilt the contracture footplate left or right to the desired angle. See Detail "B".
3.
Retighten the adjustment screw.
4.
If necessary, repeat STEPS 1-3 on remaining contracture footplate.
Solara 3G/Spree 3G Wheelchair
DETAIL "A"
Adjustment
Contracture
Screw
Footplate
FIGURE 2 Adjusting the Angle of the Contracture Assembly
100
DETAIL "B"
Contracture
Footplate
Adjustment
Screw
Part No 1154295