Adjusting The Height Of The Adjustable Height Back Canes; Adjusting The Back Angle - Invacare Solara 3G User Manual

9 BACK/SEAT
9.2 Adjusting the Height of the Adjustable Height
Back Canes
Fixed Back Cane/Recliner Back Cane
 Both back canes should be adjusted to the same
adjustment hole.
1. Remove the back height adjustment screw and locknut that secure
the back cane to the wheelchair frame.
2. Adjust the back cane to the desired height adjustment hole.
3. Reinstall the back height adjustment screw and locknuts that secure
the back canes to the wheelchair frame.
9.3

Adjusting the Back Angle

Adjusting the Back Angle on Wheelchairs Equipped with Fixed Back
1. Remove the mounting screw, spacer and locknut that secures the inner and outer backrest mounting brackets together.
2. Repeat STEP 1 for the remaining back cane.
3. Adjust the back to the desired angle by aligning the mounting hole of the inner bracket with the mounting hole of the outer bracket. The available
° °
back angles are 90 , 95 , 100
4. Secure the inner and outer backrest mounting brackets together at the desire back angle with a mounting screw, spacer and locknut. Securely tighten.
5. Repeat STEP 4 for the remaining back cane.
Invacare® Solara®3G/Spree 3G Wheelchair
° ° ° ° °
, 105 , 110 , 115 , 120 (Detail "A").
Fixed Back Cane
Locknut
FIGURE 2 Adjusting the Height of the Adjustable
Height Back Canes
68
Recliner Back Cane
Back Cane
Back Height
Adjustment
Holes
Back Height
Adjustment
Screw
Part No 1154295
Locknut