View The Activity Log - NETGEAR ProSAFE WN203 Reference Manual

ProSAFE Single Band 802.11n Wireless Access Point WN203
Setting
Cipher
SNR
Recv. Bytes
Trans. bytes
Assoc. Time Stamp
IP Address
Channel Width

View the Activity Log

You can view the wireless access point's activity logs onscreen and save the logs.

To display the activity log and save it:
1. Select Monitoring > Logs.
The Logs screen displays:
2. (Optional) Click the Refresh button.
The information onscreen is updated.
3. (Optional) Click the Save As button.
4. Navigate to the desired location, and save the log contents.
Note: The nature of this step depends on the browser that you are using.
Description
The cipher that the wireless client is using and that defines the type of encryption.
The signal-to-noise ratio (SNR) that indicates how much the signal of the wireless
client has been corrupted by noise.
The number of bytes received on the wireless client since it last started.
The number of bytes transmitted by the wireless client since it last started.
The time when these details of the wireless client were retrieved.
The IP address of the wireless client.
The channel width at which the wireless client operates.
Monitoring
96