Rebooting And Resetting Factory Default Options; Restoring The Wg602V3 To The Factory Default Settings; Using The Reset Button To Reboot Or Restore Factory Defaults - NETGEAR WG602v3 Reference Manual

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3

Rebooting and Resetting Factory Default Options

The Reboot option restarts the access point. From the Management section of the main menu,
select Reboot AP. Select Yes, then click Apply to reboot the access point.

Restoring the WG602v3 to the Factory Default Settings

It is sometimes desirable to restore the wireless access point to the factory default settings. This
can be done by using the Restore Factory Default function, which restores all factory settings.
After a restore, the password will be password, the DHCP client is enabled, the WG602v3
defaults to the LAN IP address of 192.168.0.227 when there is no DHCP server, and the NetBIOS
name is reset to NETGEAR plus the last 6 digits of the MAC address printed on the label on the
bottom of the unit, for example NETGEAR123456.
On the Restore Factory Default Settings screen, select Yes, then click Apply to restore the factory
default settings.

Using the Reset Button to Reboot or Restore Factory Defaults

To restore the factory default configuration settings without knowing the login password or IP
address, you must use the Default Reset button on the rear panel of the wireless access point (see
"WG602v3 Wireless Access Point Rear Panel" on page
• Reboot. When pressed and released quickly, the wireless access point will reboot (restart).
• Reset to Factory Defaults. This button can also be used to clear all data and restore all
settings to the factory default values, when held down longer.
To clear all data and restore the factory default values:
Use something with a small point, such as a pen, to press the Reset button in for at least 10
1.
seconds.
Release the Reset button.
2.
The factory default configuration has now been restored, and the WG602v3 is ready for use.
Management
2-6). The reset button has two functions:
202-10060-02, February 2005
4-5